Pages

Showing posts with label RepRap. Show all posts
Showing posts with label RepRap. Show all posts

Wednesday, September 25, 2013

Another 3d FDM Printer

What's this? Another 3d FDM Printer? Well, basically yes... A little explanation is in order. When I first got my MakerBot Thing-O-Matic a few years back, I decided to create a RepRap Prusa Mendal machine http://reprap.org/wiki/Prusa_Mendel_Assembly . Unfortunately, the project never got finished and I had moved on to other things. The half-assembled frame and pieces sat in a box for a few years, but was always on my mind (I hate un-finished projects)

Lately, I've been waiting on some 80/20 1" aluminum extrusion and parts to arrive for my 3d UV DLP printer rebuild (yes, that's happening too). However, the itch to build something has been strong, so I decided to un-box my Prusa Mendal (Iteration 1) and finish it. 

Well, after reading about the numerous shortcomings of the iteration 1 Prusa design, I decided a complete rebuild was in order. Using the iteration 3 (I) design as a starting point, I made some modifications to the design, including the addition of a baseboard instead of threaded rod for the Y axis. I went ahead and designed some new y-rod holders, new endstops, a new 5mm to 3/16 coupler, Y motor mount, as well as a few other parts. 

Amazingly, I completed 90% of the build in 1 day (about 8 hours), including build the wood base, painting, and assembling. The second day (2 hrs), I wired it up. The 3rd day (last night) I attached the extruder, did some cable management, and set up the new Sprinter firmware steps per mm. 
The only remaining issues are:
1) Z-Axis endstop switch (I was designing it this morning, I'll probably print it later)
2) HBP Platform leveling.

What am I going to do with this new printer? Well, my 2 main options are: Sell it to a friend who has been dying to get one, or bring it into work under the pretense of designing / printing enclosures for the various work-related projects / products I am involved in.

As a side note, my un-released 'Creation Workshop v12 Beta' now has full support for FDM based machines. I used this to configure and test my new printer. If you're feeling bold, get my latest v12 release from Git and give it a go. I plan on releasing the latest version when I fix some support generation issues.


Update 9/26/2013 - 
Well, I got the finishing touches put on this machine, installed the extruder, leveled the bed, and finished up the end stops. I made my first successful print with it last night!